在这项工作中，我们提出了一种方法，用于生成降低的模型参考轨迹，用于用于双皮亚机器人的高度动态操作的一般类别，用于SIM卡之间，用于SIM卡至现实的增强学习。我们的方法是利用单个刚体模型（SRBM）来优化轨迹的库库，以用作学习政策的奖励函数中的专家参考。该方法将模型的动态旋转和翻译行为转化为全阶机器人模型，并成功将其传输到真实硬件。 SRBM的简单性允许快速迭代和行为改进，而基于学习的控制器的鲁棒性则可以将高度动态的动作传输到硬件。 ％在这项工作中，我们介绍了一套可转移性约束，将SRBM动态修改为实际的两足机器人硬件，这是我们为动态步进，转动操作和跳跃创建最佳轨迹的框架。在这项工作中，我们介绍了一套可转移性约束，将SRBM动力学修改为实际的双皮亚机器人硬件，我们为各种高度动态的操作创建最佳轨迹的框架，以及我们整合参考轨迹的高速强化跑步轨迹的方法学习政策。我们验证了在两足机器人Cassie上的方法，我们成功地展示了高达3.0 m/s的高度动态接地步态。

Likelihood-based deep generative models have recently been shown to exhibit pathological behaviour under the manifold hypothesis as a consequence of using high-dimensional densities to model data with low-dimensional structure. In this paper we propose two methodologies aimed at addressing this problem. Both are based on adding Gaussian noise to the data to remove the dimensionality mismatch during training, and both provide a denoising mechanism whose goal is to sample from the model as though no noise had been added to the data. Our first approach is based on Tweedie's formula, and the second on models which take the variance of added noise as a conditional input. We show that surprisingly, while well motivated, these approaches only sporadically improve performance over not adding noise, and that other methods of addressing the dimensionality mismatch are more empirically adequate.

深度学习在学习高维数据的低维表示方面取得了巨大的成功。如果在感兴趣的数据中没有隐藏的低维结构，那么这一成功将是不可能的。这种存在是由歧管假设提出的，该假设指出数据在于固有维度低的未知流形。在本文中，我们认为该假设无法正确捕获数据中通常存在的低维结构。假设数据在于单个流形意味着整个数据空间的内在维度相同，并且不允许该空间的子区域具有不同数量的变异因素。为了解决这一缺陷，我们提出了多种假设的结合，该假设适应了非恒定固有维度的存在。我们从经验上验证了在常用图像数据集上的这一假设，发现确实应该允许内在维度变化。我们还表明，具有较高内在维度的类更难分类，以及如何使用这种见解来提高分类精度。然后，我们将注意力转移到该假设的影响下，在深层生成模型（DGM）的背景下。当前的大多数DGM都难以建模具有几个连接组件和/或不同固有维度的数据集建模。为了解决这些缺点，我们提出了群集的DGM，首先将数据聚集，然后在每个群集上训练DGM。我们表明，聚类的DGM可以模拟具有不同固有维度的多个连接组件，并在没有增加计算要求的情况下经验优于其非簇的非群体。

在$ \ mathbb {r}^n $中观察到的自然数据通常被限制为$ m $ dimensional歧管$ \ mathcal {m} $，其中$ m <n $。当前的生成模型通过通过神经网络$ f_ \ theta映射$ m $二维潜在变量来表示此流形：\ mathbb {r}^m \ to \ mathbb {r}^n $。我们称之为Pushforward模型的此类过程产生了一个直接的限制：通常不能以单个参数化表示歧管，这意味着尝试这样做的方法将导致计算不稳定性或无法在歧管内学习概率密度。为了解决这个问题，我们建议将$ \ mathcal {m} $建模为神经隐式歧管：神经网络的零零。为了了解$ \ Mathcal {M} $中的数据分布，我们引入了受限的基于能量的模型，该模型使用Langevin Dynamics的约束变体来训练和示例在学习的歧管中。可以用歧管的算术来操纵所得模型，该模型使从业者可以采用工会和模型歧管的交叉点。在有关合成和自然数据的实验中，我们表明，受约束的EBM可以比推送模型更准确地学习具有复杂拓扑的歧管支配分布。

基于似然或显式的深层生成模型使用神经网络来构建灵活的高维密度。该公式直接与歧管假设相矛盾，该假设指出，观察到的数据位于嵌入高维环境空间中的低维歧管上。在本文中，我们研究了在这种维度不匹配的情况下，最大可能的训练的病理。我们正式证明，在学习歧管本身而不是分布的情况下，可以实现堕落的优点，而我们称之为多种歧视的现象过于拟合。我们提出了一类两步程序，该过程包括降低降低步骤，然后进行最大样子密度估计，并证明它们在非参数方面恢复了数据生成分布，从而避免了多种歧视。我们还表明，这些过程能够对隐式模型（例如生成对抗网络）学到的流形进行密度估计，从而解决了这些模型的主要缺点。最近提出的几种方法是我们两步程序的实例。因此，我们统一，扩展和理论上证明了一大批模型。

While the brain connectivity network can inform the understanding and diagnosis of developmental dyslexia, its cause-effect relationships have not yet enough been examined. Employing electroencephalography signals and band-limited white noise stimulus at 4.8 Hz (prosodic-syllabic frequency), we measure the phase Granger causalities among channels to identify differences between dyslexic learners and controls, thereby proposing a method to calculate directional connectivity. As causal relationships run in both directions, we explore three scenarios, namely channels' activity as sources, as sinks, and in total. Our proposed method can be used for both classification and exploratory analysis. In all scenarios, we find confirmation of the established right-lateralized Theta sampling network anomaly, in line with the temporal sampling framework's assumption of oscillatory differences in the Theta and Gamma bands. Further, we show that this anomaly primarily occurs in the causal relationships of channels acting as sinks, where it is significantly more pronounced than when only total activity is observed. In the sink scenario, our classifier obtains 0.84 and 0.88 accuracy and 0.87 and 0.93 AUC for the Theta and Gamma bands, respectively.

There are multiple scales of abstraction from which we can describe the same image, depending on whether we are focusing on fine-grained details or a more global attribute of the image. In brain mapping, learning to automatically parse images to build representations of both small-scale features (e.g., the presence of cells or blood vessels) and global properties of an image (e.g., which brain region the image comes from) is a crucial and open challenge. However, most existing datasets and benchmarks for neuroanatomy consider only a single downstream task at a time. To bridge this gap, we introduce a new dataset, annotations, and multiple downstream tasks that provide diverse ways to readout information about brain structure and architecture from the same image. Our multi-task neuroimaging benchmark (MTNeuro) is built on volumetric, micrometer-resolution X-ray microtomography images spanning a large thalamocortical section of mouse brain, encompassing multiple cortical and subcortical regions. We generated a number of different prediction challenges and evaluated several supervised and self-supervised models for brain-region prediction and pixel-level semantic segmentation of microstructures. Our experiments not only highlight the rich heterogeneity of this dataset, but also provide insights into how self-supervised approaches can be used to learn representations that capture multiple attributes of a single image and perform well on a variety of downstream tasks. Datasets, code, and pre-trained baseline models are provided at: https://mtneuro.github.io/ .

Periocular refers to the region of the face that surrounds the eye socket. This is a feature-rich area that can be used by itself to determine the identity of an individual. It is especially useful when the iris or the face cannot be reliably acquired. This can be the case of unconstrained or uncooperative scenarios, where the face may appear partially occluded, or the subject-to-camera distance may be high. However, it has received revived attention during the pandemic due to masked faces, leaving the ocular region as the only visible facial area, even in controlled scenarios. This paper discusses the state-of-the-art of periocular biometrics, giving an overall framework of its most significant research aspects.

The ability to convert reciprocating, i.e., alternating, actuation into rotary motion using linkages is hindered fundamentally by their poor torque transmission capability around kinematic singularity configurations. Here, we harness the elastic potential energy of a linear spring attached to the coupler link of four-bar mechanisms to manipulate force transmission around the kinematic singularities. We developed a theoretical model to explore the parameter space for proper force transmission in slider-crank and rocker-crank four-bar kinematics. Finally, we verified the proposed model and methodology by building and testing a macro-scale prototype of a slider-crank mechanism. We expect this approach to enable the development of small-scale rotary engines and robotic devices with closed kinematic chains dealing with serial kinematic singularities, such as linkages and parallel manipulators.

This paper considers a combination of actuation tendons and measurement strings to achieve accurate shape sensing and direct kinematics of continuum robots. Assuming general string routing, a methodical Lie group formulation for the shape sensing of these robots is presented. The shape kinematics is expressed using arc-length-dependent curvature distributions parameterized by modal functions, and the Magnus expansion for Lie group integration is used to express the shape as a product of exponentials. The tendon and string length kinematic constraints are solved for the modal coefficients and the configuration space and body Jacobian are derived. The noise amplification index for the shape reconstruction problem is defined and used for optimizing the string/tendon routing paths, and a planar simulation study shows the minimal number of strings/tendons needed for accurate shape reconstruction. A torsionally stiff continuum segment is used for experimental evaluation, demonstrating mean (maximal) end-effector absolute position error of less than 2% (5%) of total length. Finally, a simulation study of a torsionally compliant segment demonstrates the approach for general deflections and string routings. We believe that the methods of this paper can benefit the design process, sensing and control of continuum and soft robots.